Bluetooth 2000mAh 7.4Wh Smart Handheld RFID Reader IC ID Card Reader Writer

iCopy-XS is a "super" automated handheld RFID copier based on Proxmark3. iCopy-XS can read, crack, duplicate, sniff and simulate without the use of a PC.

Currently, iCopy-XS reads up to 39 types of RFID system cards and copies up to 37 types of RFID cards which is the highest in the world.

Hardware Specification

Charging and battery

Battery capacity: 2000mAh 7.4Wh

Charging interface: USB type-C double-sided charging

interface

Charging power: 10W (MAX)

Charging time: 2 hours

OTG function: support

Standby time: 4.5 hours

Processor and memory

CPU technology: Cortex-A7

CPU frequency: 600MHz

GPU: ARM Mali

Memory: 256MB+4GB 256MB+8GB 256MB+16GB

EXPLORING YOUR ICOPY-XS

GETTING STARTED

USING ICOPY-XS

1) Auto Copy

Automatic scanning, reading, and writing of all information of the original RFID Tag to a

new UID card/tag.

2) Scan Tag

Scanning of tag and getting the basic information of the tag type.

3) Read Tag

Reading of all available information of tag (including blocks and sectors).

4) Sniff Traffic

Sniffing of locked sector keys for cards/tag.

5) Simulation

Simulation of Low and High Frequency RFID Tags

6) PC-MODE

Enter PC-Mode for expert mode

7) Backlight

OFF/ON Backlight of screen

8) Diagnosis

Running various tests to check

9) Volume

Adjusting of volume

10) About

Serial no. of ICOPY-XS and firmware update

Innovative expert mode, namely PC-mode.

In PC-Mode, after connecting to the computer, open the client in the built-in U disk, you can directly use the Proxmark3 universal CMD to operate. It is convenient for users to directly operate the equipment in a more professional way.

Copies the following fobs:

What we are not able to do
MF
ICLA SE
ICLA SE ELITE
ICLA SEOS
ICLA Elite (Custom Key)